WAPPOE12

VOIP & iPhones


Home >Linksys Product Catalogue > VOIP & iPhones > Part List > WAPPOE12


Part Number	WAPPOE12

Order Quantity

Now $84.00

We offer highly competitive incentives with all of our merchandise, including:

1 Year Warranty

Free Shipping

Technical Expertise

Easy Payment Terms

Volume Discounts

WAPPOE12 - LINKSYS WLS 12V POE ADPT KIT

Description

LINKSYS WLS 12V POE ADPT KIT

Details

Simplify your network installations with power and data on one cable! The Linksys Power Over Ethernet Adapter Kit lets you put your access points almost anywhere, by removing the requirement of nearby power outlets. By using the existing Category 5 Ethernet cabling to deliver power to any standard 5 volt access point or other network device, you save the time, hassle, and expense of running AC power to the access point's installation location. The best position for a wireless access point is usually on the ceiling, in the center of the area to be covered. Second best would be high on a nearby wall. Unfortunately, there's usually no easily accessible AC power plugs available in these locations. With the Power Over Ethernet Adapter Kit, installing the access point in these preferred spots becomes far less trouble. The Power Over Ethernet Adapter Kit is a two piece set. The "Injector" sends both power and data over one Category 5 cable to your access point, wireless router or bridge. Then the tiny "Splitter", placed at the remote location, separates the network data and DC power back into two cables, and delivers them to the access point. The Injector can also be used by itself with POE-enabled network devices that accept 48 volts directly on a POE port. This product is a 12 Volt Power Over Ethernet adapter kit.


Main Specifications

Product Description	Linksys Power Over Ethernet Adapter Kit power injector + PoE splitter
Device Type	Power injector + PoE splitter
Form Factor	External
Dimensions (WxDxH)	3.1 in x 2.2 in x 0.9 in
Weight	2.7 oz
Output connector(s)	1 x RJ-45

General
Device Type	Power injector + PoE splitter
Form Factor	External
Width	3.1 in
Depth	2.2 in
Height	0.9 in
Weight	2.7 oz
Power Device
Input Connector(s)	1 x power DC jack
Output connector(s)	1 x RJ-45
Expansion / Connectivity
Interfaces	1 x network - Ethernet 10Base-T/100Base-TX - RJ-45
Miscellaneous
Compliant Standards	FCC Class B certified
Environmental Parameters
Min Operating Temperature	32 °F
Max Operating Temperature	104 °F
Humidity Range Operating	10 - 85%

Copyright © Manucomp 2005. All Rights Reserved. Disclaimer \| Privacy Policy

	7471 Islington Avenue • Toronto, Ontario, Canada • L4L 1W2 •

Phone : 416-484-0781 • Fax : 416-946-1267 • Toll-Free: 1-866-440-1115

USE OF TRADEMARKS
This site is independent of and does not represent Sun Microsystems Inc. and/or Cisco Systems Inc. in any way. Sun Microsystems Inc. and/or Cisco Systems Inc. do not officially sponsor, approve, or endorse this site or its content. Sun Microsystems Inc. and/or Cisco Systems Inc. and all associated logo's are registered trademarks of Sun Microsystems Inc. and/or Cisco Systems Inc. respectively.