| Product Description | Cisco PIX Firewall 501 - security appliance |
| Device Type | Security appliance |
| Enclosure Type | External |
| Dimensions (WxDxH) | 6.3 in x 5.5 in x 1 in |
| Weight | 0.7 lbs |
| Processor | 1 x AMD ÉlanSC520 133 MHz x86-to-RISC |
| RAM Installed ( Max ) | 16 MB |
| Flash Memory Installed (Max) | 8 MB flash |
| Ports Qty | 4 |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Network / Transport Protocol | TCP/IP, UDP/IP, IPSec, PPPoE |
| Remote Management Protocol | SNMP |
| Communication Mode | Half-duplex, full-duplex |
| Features | Full duplex capability, firewall protection, switching, 168-bit encryption, auto-sensing per device, DHCP support, NAT support, hardware encryption, VPN, manageable |
| Power | AC 110/220 V ± 10% ( 50/60 Hz ) |
| General |
| Device Type | Security appliance |
| Built-in Devices | LED panel |
| Width | 6.3 in |
| Depth | 5.5 in |
| Height | 1 in |
| Weight | 0.7 lbs |
| Processor / Memory / Storage |
| Processors Installed | 1 x AMD ÉlanSC520 133 MHz x86-to-RISC |
| Max Supported Qty | 1 |
| RAM Installed ( Max ) | 16 MB SDRAM |
| Flash Memory Installed (Max) | 8 MB flash |
| Networking |
| Form Factor | External |
| Ports Qty | 4 |
| Connectivity Technology | Wired |
| Data Transfer Rate | 100 Mbps |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Switching Protocol | Ethernet |
| Network / Transport Protocol | TCP/IP, UDP/IP, IPSec, PPPoE |
| Remote Management Protocol | SNMP |
| Communication Mode | Half-duplex, full-duplex |
| Capacity | Connection / user qty : 10 |
| Features | Full duplex capability, firewall protection, switching, 168-bit encryption, auto-sensing per device, DHCP support, NAT support, hardware encryption, VPN, manageable |
| Encryption Algorithm | Triple DES |
| Authentication Method | RADIUS, TACACS+ |
| Compliant Standards | IEEE 802.3, IEEE 802.3U |
| Expansion / Connectivity |
| Interfaces | 4 x network - Ethernet 10Base-T/100Base-TX - RJ-45 - 4
1 x network - Ethernet 10Base-T - RJ-45 - 1
1 x management - RS-232 - RJ-45 - 1 |
| Power |
| Power Device | Power adapter - external |
| Voltage Required | AC 110/220 V ± 10% ( 50/60 Hz ) |
| Power Consumption Operational | 5 Watt |
| Power Provided | 5 Watt |
| Compliant Standards | UL |
| Software / System Requirements |
| OS Provided | Cisco PIX OS |
| Environmental Parameters |
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 104 °F |
| Humidity Range Operating | 10 - 90% |
| Shock Tolerance | 250 g @ 2ms half-sine pulse (operating) |
| Vibration Tolerance | 0.41 g @ 5-500 Hz (operating) |
| Max Altitude Operating | 6560 ft |
