| WS-C2950C-24 - CATALYST 2950 24PT 10/100 2 100BFX UPLINKS SWCH |
|
Description
|
|
CATALYST 2950 24PT 10/100 2 100BFX UPLINKS SWCH
|
|
Details
|
|
Cisco Catalyst 2950C-24 - Switch - 24 ports - EN, Fast EN - 10Base-T, 100Base-TX + 2x100BaseFX(MT-RJ)(uplink) - 1U - stackable
|
| Main Specifications |
| Product Description | Cisco Catalyst 2950C-24 - switch - 24 ports |
| Device Type | Switch - stackable |
| Form Factor | External - 1U |
| Dimensions (WxDxH) | 17.5 in x 9.5 in x 1.7 in |
| Weight | 6.6 lbs |
| RAM | 16 MB SDRAM |
| Flash Memory | 8 MB |
| Ports Qty | 24 x Ethernet 10Base-T, Ethernet 100Base-TX |
| Data Transfer Rate | 100 Mbps |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Auxiliary Network Ports | 2x100BaseFX(MT-RJ)(uplink) |
| Remote Management Protocol | SNMP, RMON, Telnet |
| Communication Mode | Half-duplex, full-duplex |
| Features | Network monitoring, full duplex capability, uplink, VLAN support, manageable, stackable |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x |
| Power | AC 120/230 V AC 110/220 V ± 10% ( 50/60 Hz ) |
| General |
| Device Type | Switch - stackable |
| Enclosure Type | Rack-mountable - external - 1U |
| Width | 17.5 in |
| Depth | 9.5 in |
| Height | 1.7 in |
| Weight | 6.6 lbs |
| Memory |
| RAM | 16 MB SDRAM |
| Flash Memory | 8 MB flash |
| Networking |
| Ports Qty | 24 x Ethernet 10Base-T, Ethernet 100Base-TX |
| Auxiliary Network Ports | 2x100BaseFX(MT-RJ)(uplink) |
| Data Transfer Rate | 100 Mbps |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Remote Management Protocol | SNMP, RMON, Telnet |
| Connectivity Technology | Wired |
| Communication Mode | Half-duplex, full-duplex |
| Switching Protocol | Ethernet |
| MAC Address Table Size | 8K entries |
| Status Indicators | Port status, link activity, collision status, port transmission speed, port duplex mode, bandwidth utilization %, power, link OK |
| Features | Network monitoring, full duplex capability, uplink, VLAN support, manageable, stackable |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x |
| Expansion / Connectivity |
| Interfaces | 24 x network node - Ethernet 10Base-T/100Base-TX - RJ-45
1 x management - RJ-45
2 x network host - Ethernet 100Base-FX - MT-RJ |
| Miscellaneous |
| Compliant Standards | FCC Class A certified, VCCI |
| Power |
| Power Device | Power supply - internal |
| Voltage Required | AC 120/230 V AC 110/220 V ± 10% ( 50/60 Hz ) |
| Features | Redundant Power System (RPS) connector |
| Software / System Requirements |
| Software Included | Enhanced Image (EI) Software |
| Environmental Parameters |
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 104 °F |
| Humidity Range Operating | 10 - 90% |
| Max Altitude Operating | 9840 ft |
|
|
