| WS-C2950C-24-RF - REFURB CATALYST 2950 24PT 2 100BFX |
|
Description
|
|
REFURB CATALYST 2950 24PT 2 100BFX
|
|
Details
|
|
CATALYST 2950 24PT 10/100 2 100BFX UPLINKS SWCH |
|
Cisco end-to-end enterprise network solutions form the most comprehensive line of networking products available in the industry. From the branch office to the WAN and campus backbone, Cisco products are the leading choice of the enterprise. The Catalyst 2950 Series is an affordable product line that brings intelligent services, such as advanced quality of service, rate-limiting, security filters, and multicast management, to the network edge-while maintaining the simplicity of traditional LAN switching. When a Catalyst 2950 Switch is combined with a Catalyst 3550 Series Switch, the solution enables IP routing from the edge to the core of the network. |
|
| Product Description | Cisco Catalyst 2950C-24 - switch - 24 ports |
| Device Type | Switch - stackable |
| Form Factor | External - 1 U |
| Dimensions (WxDxH) | 17.5 in x 9.5 in x 1.7 in |
| Weight | 6.6 lbs |
| RAM | 16 MB SDRAM |
| Flash Memory | 8 MB |
| Ports Qty | 24 x Ethernet 10Base-T, Ethernet 100Base-TX |
| Data Transfer Rate | 100 Mbps |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Auxiliary Network Ports | 2x100BaseFX(MT-RJ)(uplink) |
| Remote Management Protocol | SNMP, RMON, Telnet |
| Communication Mode | Half-duplex, full-duplex |
| Features | Network monitoring, full duplex capability, uplink, VLAN support, manageable, stackable |
| Compliant Standards | IEEE 802.3, IEEE 802.3U, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x |
| Power | AC 120/230 V AC 110/220 V ± 10% ( 50/60 Hz ) |
| General |
| Device Type | Switch - stackable |
| Enclosure Type | Rack-mountable - external - 1 U |
| Width | 17.5 in |
| Depth | 9.5 in |
| Height | 1.7 in |
| Weight | 6.6 lbs |
| Memory |
| RAM | 16 MB SDRAM |
| Flash Memory | 8 MB flash |
| Networking |
| Ports Qty | 24 x Ethernet 10Base-T, Ethernet 100Base-TX |
| Auxiliary Network Ports | 2x100BaseFX(MT-RJ)(uplink) |
| Data Transfer Rate | 100 Mbps |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Remote Management Protocol | SNMP, RMON, Telnet |
| Connectivity Technology | Wired |
| Communication Mode | Half-duplex, full-duplex |
| Switching Protocol | Ethernet |
| MAC Address Table Size | 8K entries |
| Status Indicators | Port status, link activity, collision status, port transmission speed, port duplex mode, bandwidth utilization %, power, link OK |
| Features | Network monitoring, full duplex capability, uplink, VLAN support, manageable, stackable |
| Compliant Standards | IEEE 802.3, IEEE 802.3U, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x |
| Expansion / Connectivity |
| Interfaces | 24 x network node - Ethernet 10Base-T/100Base-TX - RJ-45
1 x management - RJ-45
2 x network host - Ethernet 100Base-FX - MT-RJ |
| Miscellaneous |
| Compliant Standards | FCC Class A certified, VCCI |
| Power |
| Power Device | Power supply - internal |
| Voltage Required | AC 120/230 V AC 110/220 V ± 10% ( 50/60 Hz ) |
| Features | Redundant Power System (RPS) connector |
| Software / System Requirements |
| Software Included | Enhanced Image (EI) Software |
| Environmental Parameters |
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 104 °F |
| Humidity Range Operating | 10 - 90% |
| Max Altitude Operating | 9840 ft |
|
|
