| WS-C2950-24 - CATAYLST 2950 24PT 10/100 SWITCH |
|
Description
|
|
CATAYLST 2950 24PT 10/100 SWITCH
|
|
Details
|
|
Cisco Catalyst 2950-24 - Switch - 24 ports - EN, Fast EN - 10Base-T, 100Base-TX - 1U
|
| Main Specifications |
| Product Description | Cisco Catalyst 2950-24 - switch - 24 ports |
| Device Type | Switch |
| Form Factor | External - 1U |
| Dimensions (WxDxH) | 17.5 in x 9.5 in x 1.7 in |
| Weight | 6.6 lbs |
| Flash Memory | 8 MB |
| Ports Qty | 24 x Ethernet 10Base-T, Ethernet 100Base-TX |
| Data Transfer Rate | 100 Mbps |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP |
| Communication Mode | Half-duplex, full-duplex |
| Features | Flow control, full duplex capability, trunking, VLAN support, IGMP snooping, Syslog support, Weighted Round Robin (WRR) queuing, firmware upgradable |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
| Power | AC 120/230 V AC 110/220 V ± 10% ( 50/60 Hz ) |
| Manufacturer Warranty | Limited lifetime warranty |
| General |
| Device Type | Switch |
| Enclosure Type | Rack-mountable - external - 1U |
| Width | 17.5 in |
| Depth | 9.5 in |
| Height | 1.7 in |
| Weight | 6.6 lbs |
| Memory |
| Flash Memory | 8 MB flash |
| Networking |
| Ports Qty | 24 x Ethernet 10Base-T, Ethernet 100Base-TX |
| Data Transfer Rate | 100 Mbps |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP |
| Connectivity Technology | Wired |
| Communication Mode | Half-duplex, full-duplex |
| Switching Protocol | Ethernet |
| MAC Address Table Size | 8K entries |
| Status Indicators | Link activity, port transmission speed, port duplex mode, bandwidth utilization %, power, link OK, status |
| Features | Flow control, full duplex capability, trunking, VLAN support, IGMP snooping, Syslog support, Weighted Round Robin (WRR) queuing, firmware upgradable |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
| Expansion / Connectivity |
| Interfaces | 1 x management - console - RJ-45 - 24
24 x network - Ethernet 10Base-T/100Base-TX - RJ-45 - 1 |
| Miscellaneous |
| Authentication Method | RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
| Compliant Standards | CE, FCC Class A certified, CISPR 22 Class A, BSMI CNS 13438 Class A, EN 60950, VCCI Class A ITE, IEC 60950, CSA 22.2 No. 950, EN55022 Class A, UL 60950, ACA TS001, AS/NZS 3260, FCC Part 15, MIC |
| Power |
| Power Device | Power supply - internal |
| Voltage Required | AC 120/230 V AC 110/220 V ± 10% ( 50/60 Hz ) |
| Power Consumption Operational | 30 Watt |
| Features | Redundant Power System (RPS) connector |
| Software / System Requirements |
| Software Included | Standard Image (SI) Software |
| Manufacturer Warranty |
| Service & Support | Limited lifetime warranty |
| Service & Support Details | Limited warranty - lifetime |
| Environmental Parameters |
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 113 °F |
| Humidity Range Operating | 10 - 85% |
| Max Altitude Operating | 9840 ft |
|
|
